Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCGI Windows & Doors in Tampa, FL | TruePane Windows & Doors
We provide independent CGI windows and doors service across Tampa, from South Tampa CBS homes to Hyde Park bungalows. Here’s the thing that separates our CGI work from a generic window company: we’ve spent years pulling apart failed CGI units in Tampa’s salt air and humidity, so we know exactly which parts fail first and what to replace them with. Call (813) 320-9346 for service. We’re not affiliated with CGI. We work on their product because Tampa demands it, and because we’ve learned where it holds up and where it needs help.
Why Tampa Residents Choose Us for CGI Service
There’s a difference between a company that sells CGI and a crew that has been servicing it across Tampa for over a decade. Dale Kessler, our owner, came up through Hillsborough Community College’s construction technology program and spent more time on the shop floor than in a classroom. That’s where he learned seals, set points, and the unglamorous stuff that determines whether an impact window still holds its rating five years in. When we service a CGI unit in Tampa, we’re not guessing at the product line. We know the Sentinel Series, the Estate Collection, and the Targa Series well enough to diagnose a failure mode before the truck is parked. And because we’re local, we treat your CGI windows the way we’d treat them on a house six blocks from Dale’s place in Seminole Heights. The CGI sales & service work we do carries the same standard as every other job: if the pane is not true, the job is not done.
Common CGI Windows & Doors Problems We Solve in Tampa
- Salt-air corrosion on uncoated CGI aluminum frames. On Davis Islands, Harbour Island, and along Bayshore Boulevard, we routinely see pitting and white bloom on CGI frames within 8 to 12 years. West- and southwest-facing elevations take the worst of it because that’s where the bay air pushes against the house all afternoon.
- IGU seal failure and interior fogging. Tampa’s humidity plus the thermal cycling from near-daily summer thunderstorms puts real stress on insulated glass units. We see older CGI units fog between the panes far earlier here than the same product would in an inland city.
- Sagging or misaligned CGI sliding door rollers and tracks. Wind-driven rain at thresholds on ground-level CBS homes works water into the track, and the rollers corrode and seize. A door that was smooth in January can bind by July.
- Powder coat chalking and fading on exposed frames. South-facing elevations in Carrollwood and Temple Terrace take relentless UV. Dark bronze CGI frames chalk first, but white frames yellow and dull, and once the coating fails, the aluminum underneath is exposed.
- Failed weatherstripping and sweep seals. Constant humidity and salt air harden rubber seals faster than anyone expects. When the seal goes, water gets behind the frame and insurance inspectors start asking questions.
CGI Service in Tampa: What Local Conditions Mean for Your Equipment
Here’s a fact that shapes every CGI job we do in Tampa and it would not be true forty minutes north: Hillsborough County falls entirely within the Florida Building Code’s wind-borne debris region. That means virtually every CGI window or door replacement here, even a like-for-like swap, must carry a Florida Product Approval and meet design pressure ratings based on the home’s exact wind speed and exposure category. Pasco and Polk counties have partial exemptions. Tampa does not. We run wind-load calculations on every opening, including replacements the homeowner assumes are code-neutral. On Bayshore Boulevard, where exposure category jumps because of open water exposure, a CGI unit that passed on a Carrollwood lot may not pass at all. If you own CGI windows in Tampa, and something fails, the repair has to preserve the product’s rating or your insurance documentation falls apart. That’s the reason we do not shortcut with whatever roller happens to fit. If it needs to be in writing to be true, we will put it in writing.
CGI Models & Products We Service in Tampa
We service the CGI Sentinel Series, the Estate Collection including the Estate Awning Window, and the Targa Series. For parts, we always prefer genuine CGI replacements: rollers, balances, weatherstripping, sweep seals. They are machined to the original extrusion tolerances and carry the same Florida Product Approval numbers your inspector wants to see. On older or discontinued CGI lines where OEM parts are no longer available, we use marine-grade, corrosion-resistant aftermarket hardware and we tell you the difference before we install it. If the frame itself is compromised, we say so and recommend replacement rather than patching a losing battle. As part of our broader Tampa service area coverage, we stock the common failure parts locally so a repair is not waiting on a warehouse in another state.
CGI Service Pricing in Tampa
CGI service pricing in Tampa varies by the work. A roller replacement on a slider might run $180 to $340 depending on the track condition and part availability. An IGU replacement on an impact window typically starts around $450 and climbs if the frame needs corrosion remediation or re-sealing. Full frame replacement with a new CGI product starts in the low thousands per opening, and it’s driven by design pressure requirements and what the opening’s exposure category demands. Every estimate we give is line-itemed on paper, both warranty layers stated, and a fixed price before we start. Call (813) 320-9346 and we’ll walk the house and give you numbers you can keep.
Serving Tampa, FL - Our Local Coverage Area
We’re based in the Tampa area and know this community well, from CGI in Safety Harbor to Pinellas Park. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - CGI Windows & Doors in Tampa
Yes. Hillsborough County sits entirely inside the wind-borne debris region under the Florida Building Code, so the replacement product must carry a Florida Product Approval and meet the design pressure rating for that specific opening’s wind speed and exposure category. There is no like-for-like exemption in Tampa like there is in parts of Pasco or Polk. We run the wind-load calculation on every opening before quoting a replacement. Call (813) 320-9346 to have your openings measured and rated.
Davis Islands gets three-sided salt-air exposure off Tampa Bay, and the west- and southwest-facing elevations absorb the strongest salt-laden wind. Carrollwood is far enough inland that salt deposition is negligible. The same CGI model will hold its finish far longer in Carrollwood than on Davis Islands, which is why we spec heavy-wall marine-grade aluminum or add protective coating on bayfront jobs. Salt corrosion is not a warranty issue, it’s an environment issue, and the fix has to match the exposure.
In many cases, yes. If the frame and the impact laminate are intact, the failed insulated glass unit can be removed and replaced while preserving the sash and its Florida Product Approval. If the frame extrusion is corroded or the structural seal has failed, the sash needs replacement. We’ll tell you which applies to your window, not whichever path is more convenient for us.
No, you are not stuck with white vinyl. Hyde Park’s historic-district review board cares about character, and there are CGI configurations with darker frame finishes and profiles that read far more traditional than a standard white impact unit. The process takes longer because design-pressure requirements still apply and the historic review has its own approval path. We have worked through enough Hyde Park jobs to know what the board will push back on and what it will accept. Call (813) 320-9346 and we’ll walk you through the options that fit both the code and the house.
Tampa insurers typically want the Florida Product Approval number for each installed product, proof the installation matched the manufacturer’s requirements, and a wind mitigation inspection report where applicable. We register both warranty layers in writing and provide the documentation your carrier will ask for before we leave the driveway. If your carrier needs something specific, tell us in advance and we’ll make sure it’s in the packet. Call (813) 320-9346 to talk through your policy requirements before the install.
Service Areas Near Tampa
We run CGI service across Tampa and into the surrounding communities. You’ll find our trucks in Apollo Beach, Anna Maria, Alafaya, Altamonte Springs, and Acacia Villas. If you’re up the coast, see CGI service in Tarpon Springs. Farther inland, we cover CGI service in Tavares as well. If you’re not sure whether you’re in range, call and ask. A live person answers.
Book Your CGI Service in Tampa Today
If your CGI windows or doors need attention in Tampa, call (813) 320-9346. We’ll get a technician out, diagnose the problem, and hand you a written estimate before any work starts. Most repairs happen in a single visit.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Tampa since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.